【型号及规格参数】

型号	GQD150K大开门变频管式离心机			分离因素（w2r/g）	电机功率（kw）	整机重量（kg）	外形尺寸（mm）
	直径（mm）	转鼓容积（L）	转速（r/min）
105	105	6	8000-16300	15700	2.2	570	840*500*1600
125	125	8	9000-15000	15750	3	610	900*500*1600
150	150	10	10000-14300	14300	3	665	900*550*1600

【主要特点】
本机是我公司在GQ150变频高速离心机后又研发出来的一款新型大开门高速变频离心机。
大开门离心机易损件使用寿命长，设备不易损坏，启动平稳，比摇摆式离心机使用寿命长，占地空间小，操作简单，大大提高了操作的安全系数。设计成可开门机身大大的降低了劳动强度，而且并可根据现场空间将转鼓水平拉出，置于特制的不锈钢操作台上，清除固相物，实现快捷方便的清理
启动时手动调速，缓慢启动，对轴承和转鼓起到极好的保护作用，降低更换易损件频率，防止转鼓摔伤，减少转鼓做动平衡次数，增加易损件的使用寿命。
停机拆卸时，机身两侧门可以全部打开，轻松把沉重的转鼓取出清洗。
 
【主要用途】
本机主要用于分离各种难于分离的悬浮液，将悬浮液中的絮状物及微小固体颗粒分离出来。
特别适用于浓度低、粘度大、固相颗粒细小、固液比重差较小的。
如：动植物提取液、发酵液，各种中药液体、膏剂除渣，苹果酸，各种口服液，北豆根澄清；石墨澄清，各种油漆、机油、柴油、煤焦油、润滑油等除渣，各种蛋白、菌体的分离和浓缩，阿胶提纯。
 
 
 
【工作原理】
分离机由机身、传动系统、转鼓、集液系统、进液系统组成。
转鼓上部与挠性主轴链接，底部是阻尼滑动轴承。
设备工作时转鼓绕自身轴线高速旋转，形成强大的离心力场。物料由底部进液系统的进液喷嘴射入，转鼓内的离心力迫使料液沿转鼓内壁向上流动，且因料液不同组成的密度差而分层。



GQD150K Large-opening frequency conversion tubular centrifuge

【Specification】

Model	GQD150K Large-opening frequency conversion tubular centrifuge			Separation factor（w2r/g）	Motor power（kw）	Overall weight（kg）	External dimensions（mm）
	Diameter（mm）	Bowl Volume（L）	Speed（r/min）
105	105	6	8000-16300	15700	2.2	570	840*500*1600
125	125	8	9000-15000	15750	3	610	900*500*1600
150	142	10	10000-14300	14300	3	665	900*550*1600

 
 
【Characteristics】
This machine is a new type of large-opening high-speed frequency conversion centrifuge developed by our company after GQ105 frequency conversion high-speed centrifuge.
The quick-wear parts of the large-opening centrifuge have long service life, the equipment is not easy to damage, the starting is stable, the service life is longer than that of the swing centrifuge, the occupied space is small, the operation is simple, and the safety factor of the operation is greatly improved.  The machine body designed to open the door greatly reduces the labor intensity, and the rotating drum can be horizontally pulled out according to the site space and placed on a special stainless steel operation table to remove solid matters and realize quick and convenient cleaning.
Manual speed regulation and slow start during start-up play an excellent role in protecting bearings and rotating drums, reducing the frequency of replacing wearing parts, preventing the rotating drum from falling, reducing the number of dynamic balancing times of the rotating drum, and prolonging the service life of wearing parts.
When the machine is stopped and disassembled, the doors on both sides of the machine body can be fully opened, and the heavy rotating drum can be easily taken out for cleaning.
 
【Applications】
This machine is mainly used to separate various suspensions that are difficult to separate, and to separate flocs and tiny solid particles from the suspensions.
It is especially suitable for those with low concentration, large viscosity, fine solid particles and small solid-liquid specific gravity difference.
For example, animal and plant extract, fermentation liquor, various traditional Chinese medicine liquid, paste deslagging, malic acid, various oral liquids, and Asiatic moonseed rhizome clarification;  Graphite clarification, deslagging of various paints, engine oil, diesel oil, coal tar, lubricating oil, etc., separation and concentration of various proteins and thalli, and purification of donkey-hide gelatin.
 
 
【Principle】
The separator consists of a machine body, a transmission system, a rotating drum, a liquid collecting system and a liquid inlet system.
The upper part of the rotating drum is linked with the flexible main shaft, and the bottom part is a damping sliding bearing.
When the equipment works, the rotating drum rotates at high speed around its own axis, forming a strong centrifugal force field.  The material is injected from the liquid inlet nozzle of the bottom liquid inlet system, and the centrifugal force in the rotating drum forces the material liquid to flow upward along the inner wall of the rotating drum and delaminate due to the density difference of different composition of the material liquid.